Battery replacement
Each button takes a single A23 battery. The light on the button will flash or be weak when the battery needs to be replaced.
Support
Support and knowledge centre
Practical guides, straight answers and support for your BellMe system — from choosing receivers and understanding coverage to batteries, reporting software and warranty claims.
Common support requests
Adding more call buttons
A B-99G display panel takes up to 256 buttons, a wristwatch 200 and an LED light 99. Tell us your panel model and we will confirm what you can add.
A call point that is not getting through
This is usually distance or building construction. A signal repeater is normally needed beyond about 200 - 250 m in line of sight.
Reporting software
The PC or Laptop for the software must be able to run Windows 10 or 11. The software can be minimized, but must be kept open at all times and the PC must not go to sleep.
Warranty claims
Single Key Call buttons carry 5 years while other Call buttons and panels, LED lights carry 2 years. Wristwatches and signal repeaters carry 1 year.
Wristwatches
Charging port replacements and other repairs can be done by your local electronic repair shop once the watch is out of warranty.
Guides
How a wireless nurse call system works
The radio signal, the call points, the receivers, repeaters, power and cancel buttons.
How the home panic button system works
What a household needs, what it costs to run, and what happens when the button is pressed.
Choosing a receiver: wristwatch, LED light or panel
The decision that matters most, especially for overnight cover.
Response-time reporting explained
What the software records, what it needs, and what it does not do.
Product specifications and warranties
Model numbers, capacities, battery life, distances and warranty terms.
Catalogues and price lists
Find the BellMe product catalogues and price lists.
Useful videos
Setup, programming and everyday-use videos for BellMe products, grouped by product.
B-99G Display Panel
View product page- The alert on the B-99G display panel when a Call Button is pressed
- How to set the B-99G Display Panel between Voice and Ringtone
- How to set the date and time on the B-99G Display Panel
- How to delete a button from the B-99G Display Panel
- How to program buttons to the B-99G Display Panel
- How to change the volume on the B-99G Display Panel
- How to set the number of times the B-99G Display Panel will ring/call out when set to voice
- How to change how long a call will ring on the B-99G Display Panel
- How to do a factory reset on the B-99G Display Panel
- How to hear the different ringtones on the B-99G Display Panel and set the chosen one
- How to set the rolling display time between calls on the B-99G Display Panel
B-901 Display Panel
View product page- Initial Setup of the B-901 Display Panel System
- How to link your B-901 Display Panel and Gateway to the Voerka Software
- How to create the layout of your calling information on the Voerka Software
- How to program buttons to the B-901 Display Panel and Voerka Software
- How to configure your saved calling information on the Voerka Software
- How to change settings on your B-901 Display Panel
B-650 Wristwatch
View product page- How does the BellMe home use watch solution work?
- How is the BellMe watch solution used in gaming rooms?
- What does the B-650 Wristwatch Receiver do?
- How do I change the wristwatch strap to a lanyard?
- What do the E1 & E2 error codes on the Wristwatch mean?
- How do I change the alert settings?
- How do I delete a call button from the Wristwatch?
- How do I set the time on the Wristwatch?
- How do I program call buttons to the Wristwatch?
- How do I do a factory reset on the Wristwatch?
- How do I cancel a call on the Wristwatch?
B-700 LED Light
View product page- Panic button system for the elderly
- Add Buttons to an Already Programmed B-700
- Program Buttons
- Mute & Unmute the LED Light
- Connect the B-700 to the Power Supply
B-A1-WL Call Button
View product page- Single Key Call Button Overview
- How to change the battery of the Single Key button
B-SW2 Call & Cancel Button
View product page- The B-SW2 in action
Healthcare and nurse call systems
Which products are available for a healthcare nurse call system?
The current range includes B-A1-WL and B-A1-BC single-key buttons, B-SW2 and B-SW-G33 call-and-cancel wall units, B-700 LED receivers, B-650 wristwatch receivers, B-99G and B-901 display panels, W900 desktop software and the B-Q4 signal repeater.
How far can a call button transmit?
The range is between 100–150 metres depending on the surroundings. Walls, steel and the building layout affect the signal, and an on-site test determines whether B-Q4 signal repeaters are needed. An estimation can be given based on the information provided.
Can healthcare call buttons be used in bathrooms and showers?
Yes. The BellMe nurse call system includes waterproof call-point options for bedsides, bathrooms, toilets and showers. The B-A1-WL can also be worn on a lanyard.
Which receivers can alert healthcare staff?
A facility can use a B-99G or B-901 display panel, B-650 wristwatch receiver, B-700 LED light receiver, or a suitable combination of these products.
What is required for W900 reporting software?
The W900 desktop software requires the smart gateway, a router with an internet connection and a PC or laptop, with the components connected by LAN cables. The PC or laptop must be able to run windows 10 or higher.
What warranty is stated in the nurse call catalogue?
The warranty varies from product to product with a five-year warranty for the B-A1-WL single-key call button.
Technical
What frequency does the BellMe system work on?
The BellMe system works on a 433.92 MHz radio frequency. The frequency cannot be changed.
Do I need internet to use the BellMe system?
No. The system does not require an internet connection to operate. You only need internet once, to download the reporting software; after that the connection is no longer needed.
How do I know if I need a signal repeater?
You will start needing signal repeaters when the distance between the calling point and the receiver reaches around 250 m in line of sight. The surroundings and construction of the property affect this, so the only accurate way to confirm is a site inspection and test.
Compatibility
Will our Wi-Fi, two-way radios, cellular or medical equipment interfere with the system?
No. The system runs on 433.92 MHz and will not interfere with that equipment, or be interfered with by it, unless the other equipment also runs on 433.92 MHz.
Does BellMe offer an intercom that works with the nurse call system?
The BellMe wireless nurse call system does not use intercoms, as that requires wiring. Speak to a consultant about options for two-way communication using cameras that work over Wi-Fi.
Are BellMe products compatible with other nurse call systems?
BellMe does not recommend mixing another manufacturer's items with BellMe products. Our system works on 433 MHz and we cannot guarantee that another system will be compatible.
Installation
What are the PC requirements for the reporting software?
The PC or laptop must run Windows 10 or higher and must stay switched on while connected to the network by LAN cable.
What wiring does the system need?
The buttons are wireless and run on batteries. Each display panel, LED light and signal repeater needs a power source. We recommend dedicated plug points in the ceiling so they are not unplugged by mistake. Display panels and LED lights are supplied with 12 V power cables with a 2-pin plug, and the B-Q4 signal repeater with a 9V1A supply. We recommend running them through a UPS.
Feature
How long does a call button battery last?
Each call button takes an A23 battery, the same type used in electronic gate remotes. Battery life is typically six months to two years, depending on use. Some clients have reported batteries lasting considerably longer even.
Can the button be used in a shower or bathroom?
Yes. The call and cancel buttons are 100% waterproof and can be mounted in a shower or toilet, or worn on a lanyard.
Warranty
What warranty do BellMe products carry?
Single Key Call buttons carry 5 years while other Call buttons and panels, LED lights carry 2 years. Wristwatches and signal repeaters carry 1 year.
Pricing
Is BellMe a rental or a once-off purchase?
All BellMe products are a once-off purchase. There are no rental contracts.
What the system does not do
Please read this before ordering, so the system matches what you need.
- The system alerts a caregiver or staff member who is on site. It does not contact emergency services, a call centre or an armed response provider.
- It does not detect falls automatically — the user must press the button.
- It does not connect to a mobile phone or send SMS or app notifications.
- It does not include two-way voice communication. There is no intercom.
- The frequency is fixed at 433.92 MHz and cannot be changed.
- BellMe equipment is not guaranteed to work with another manufacturer's nurse call products.
Contact support
If it is urgent, call us directly:
- Phone: 060 017 5655
- WhatsApp: Message us on WhatsApp (our automated assistant replies first; a team member can take over when needed)
- Email: info@bellme.co.za
Remote support will be invoiced at R750 excl. VAT per hour.
Question not answered here?
Tell us what you are trying to solve and we will tell you whether this system does it.