Wireless single key button · 100% waterproof

B-A1-WL Call Button

Put a call for help within reach of the person who needs it — waterproof, easy to press and identified by every receiver on the system.

Frequency: 433.95 MHz
Warranty: 5 Years

A person in need needs a button within reach

Residents in bathrooms, toilets and showers are exactly the people most likely to need help — and exactly the places where most buttons cannot survive.

And a button that takes strength or dexterity to press is no button at all for someone elderly, frail or with limited hand mobility.

One waterproof button, placed wherever the person is

The B-A1-WL is 100% waterproof, so it goes where the person goes — mounted next to the bed, in the bathroom, in the toilet, or worn on a lanyard. A light press on the large soft-rubber surface raises the call, and its unique code tells every receiver exactly where it came from.

CALL∞ RECEIVERS

One press — identified on every receiver, even in the shower.

A call that is always within reach — and always identified

Help from anywhere in the room

Mounted on the wall or worn on a lanyard, the button sits exactly where the person is — bed, bath, toilet or chair — so a call for help is always within reach.

One press, every receiver alerted

A single Call Button can be programmed to an unlimited number of receivers, so one press alerts as many staff devices as needed — nobody misses the call.

Staff know exactly who called

Each button has a unique code/address, so receivers identify which button was pressed — the right person can be sent to the right place, first time.

Easy for weak or frail hands

The large soft-rubber surface activates with a light press — no force needed. That makes it particularly easy for elderly or frail people and people with limited hand mobility.

A simple response flow

The Call Button is pressed

A light press on the large soft-rubber surface sends the call wirelessly over 433.95 MHz — from a wall, a bedside or a lanyard, even where water exposure is possible.

The receivers identify the button

Because of the unique code/address, every receiver programmed with the button knows exactly where the call came from.

The call is cancelled

A compatible BellMe Cancel Button clears the call — and because receivers are unlimited, a single Cancel Button can serve many Call Buttons.

Where the B-A1-WL is used

The B-A1-WL is used in hospitals, retirement and frail care units and homes — mounted next to beds, in bathrooms, toilets and showers, or worn on a lanyard by residents who are still mobile. Below, see it doing its job in real facilities.

BellMe B-A1-WL Call Button mounted on the wall next to a hospital bed

Features and capabilities

The detailed controls for capacity, identifying calls, mounting and powering the B-A1-WL.

Unlimited receiver capacity

A single Call Button can be programmed to an unlimited number of receivers, so one button can alert multiple devices simultaneously.

Unique code

Each Call Button has a unique code/address that allows receivers to identify which button was pressed.

100% waterproof

The Call Button is 100% waterproof and can be used in showers, toilets, bathrooms and other areas where water exposure is possible.

Mountable

Mount it with two screws or double-sided tape — a mounting bracket is supplied with every Call Button. It can be fixed to any flat surface, including higher-risk areas such as bathrooms and showers.

Mobile / lanyard use

A lanyard can be attached to the rear mounting section, so the resident or patient can carry the button with them rather than being restricted to a fixed location.

Easy to press

The large soft-rubber surface is activated with a light press — particularly easy to use for elderly or frail people and people with limited hand mobility.